Honda CRF250L 2018 User Manual

Instruments, Controls, &
Other Features
Ignition Switch
Leaving the ignition switch in the ON position
with the engine stopped will drain the battery.
Do not turn the key while riding.
Engine Stop Switch
Do not use the engine stop switch except in an
emergency. Doing so when riding will cause the
engine to suddenly turn off, making riding
unsafe.
If you stop the engine using the engine stop
switch, turn the ignition switch to the OFF
position. Failing to do so will drain the battery.
Odometer
The display locks at 999,999 when the read-out
exceeds 999,999.
Tripmeter
The tripmeters return to 0.0 when each read-
out exceeds 9,999.9.
Document Bag
The owner's manual, registration, and insurance
information can be stored in the plastic
document bag located under the seat.
Ignition Cut-off System
A banking (lean angle) sensor automatically
stops the engine and fuel pump if the
motorcycle falls over. To reset the sensor, you
must turn the ignition switch to the OFF position
and back to the ON position before the engine
can be restarted.
20171129155157_31KZZA500_enu_BOOK Page 111 Wednesday, November 29 2017 16:14:18 JST
Instruments, Controls, & Other Features
Information
108

Honda CRF250L 2018 Specifications

General

Displacement	249.6cc
Bore x Stroke	76.0mm x 55.0mm
Compression Ratio	10.7:1
Transmission	6-speed
Final Drive	Chain
Front Brake	Single 256mm disc with twin-piston caliper
Rear Brake	Single 220mm disc
Front Tire	3.00-21
Rear Tire	120/80-18
Wheelbase	56.9 inches
Seat Height	34.7 inches
Fuel Capacity	2.1 gallons
Ground Clearance	10.0 inches
Engine Type	Single-cylinder, liquid-cooled, 4-stroke
Fuel System	PGM-FI
Front Suspension	43mm inverted fork
Rear Suspension	Pro-Link single shock
Curb Weight	317 lbs