Honda CRF250RX 2022 User Manual

Maintenance Schedule
To maintain the safety and reliability of your
vehicle, regular inspection and service is
required as shown in the Maintenance Schedule
that follows.
The Maintenance Schedule lists items that can
be performed with basic mechanical skills and
hand tools. Procedures for these items are
provided in Competition Handbook. The
Maintenance Schedule also includes items that
involve more extensive procedures and may
require special training, tools, and equipment.
Therefore, we recommend that you have your
dealer perform these tasks unless you have
advanced mechanical skills and the required
tools. Procedures for items in this schedule are
provided in an official Honda Service Manual
available for purchase from your dealer. 2 P. 66
CRF250RX
Service intervals in the maintenance schedule
are expressed in terms of races and riding
hours. To avoid overlooking required service,
we urge you to develop a convenient way to
record the number of races and/or hours you
ride.
CRF250R
Service intervals in the maintenance schedule
are expressed in terms of motos and riding
hours. To avoid overlooking required service,
we urge you to develop a convenient way to
record the number of motos and/or hours you
ride.
If you do not feel capable of performing a given
task or need assistance, remember that your
Honda dealer knows your vehicle best and is
fully equipped to maintain and repair it. If you
decide to do your own maintenance, use only
Honda Genuine Parts or their equivalents for
repair or replacement to ensure the best quality
and reliability.
Maintenance
32

Honda CRF250RX 2022 Specifications

General

Displacement	249.4cc
Bore x Stroke	79.0mm x 50.9mm
Compression Ratio	13.9:1
Starter	Electric
Transmission	5-speed
Final Drive	Chain
Front Brake	Single 260mm disc with twin-piston caliper
Rear Brake	Single 240mm disc
Front Tire	80/100-21
Rear Tire	110/100-18
Wheelbase	58.3 inches
Seat Height	37.8 inches
Fuel Capacity	2.1 gallons
Engine Type	Single-cylinder four-stroke
Valve Train	DOHC; four valves
Induction	PGM-FI
Ignition	Full transistorized
Front Suspension	49mm inverted Showa fork with rebound and compression damping adjustability, 12.2 inches travel
Rear Suspension	Pro-Link Showa single shock with adjustable spring preload, rebound and compression damping; 12.3 inches of travel