Honda EU2000i User Manual

35
OPERATION
3.Connect the red lead of the battery charging cable to the positive (+)
battery terminal and the black lead to the negative (–) battery

terminal.
4.Start the generator (see page 23).
Do not start the vehicle while the battery charging cable is connected
and the generator is running. The vehicle or the generator may be
damaged.
An overloaded DC circuit, excessive current draw by the battery, or a
wiring problem will trip the DC circuit protector (PUSH button extends
out). If this happens, wait a few minutes before pushing in the circuit
protector to resume operation. If the DC circuit protector continues to
go OFF, discontinue charging and see your authorized Honda generator
dealer. The circuit protector does not prevent overcharging the battery.
BATTERY CHARGING CABLE
(Optional equipment)
BATTERY CHARGING CABLE
(Optional equipment)
BLACK LEAD
RED LEAD
DC CIRCUIT
PROTECTOR
PUSH
OFF
ON
YELLOW INDICATOR
DC RECEPTACLE
31Z39600.book 35 ページ ２０１３年４月１０日 水曜日 午前１０時３４分

Honda EU2000i Specifications

General

Model	EU2000i
Type	Inverter
AC Output	120V
Engine	Honda GX100
Displacement	98.5cc
Run Time at Rated Load	3.4 hours
Run Time at 1/4 Load	8.1 hours
Starting System	Recoil
Dry Weight	45.6 lbs
Maximum AC Output	2000W
Rated AC Output	1600W
DC Output	12V, 8A
Engine Type	4-stroke, OHV, single cylinder
Fuel Tank Capacity	0.95 gallons
Run Time per Tankful	3.4 hrs @ rated load, 8.1 hrs @ 1/4 load
Noise Level	53 to 59 dBA
Dimensions	20.1" x 11.4" x 16.7"