12
Do not allow the starter grip to snap back against the engine.
Return it gently to prevent damage to the starter.
FLYWHEEL BRAKE LEVER
RREELLEEAASSEEDD
Directiontopull
STARTER GRIP
The engine switch, which is linked with the flywheel brake lever,
is turned on when the flywheel brake lever is moved to the
RELEASED position.
Move the flywheel brake lever to the RELEASED position.
Pull the starter grip lightly until you feel resistance, then pull
briskly in the direction of the arrow as shown below.
3.
4.
With FLYWHEEL BRAKE LEVER type only:
08/05/21 13:02:20 32Z0M600_012
To Next Page
Loading...
Need help?
General
