Honda HHT35S User Manual

52
TAKING CARE OF UNEXPECTED PROBLEMS
Blade or Cutting-line Head Won’t Turn
Excessive Vibration
Possible Cause Correction
Worn or broken clutch, broken drive cable, worn or
broken gear case parts.
Replace or repair faulty components as
needed.
Possible Cause Correction
Loose cutting-line head or blade nut. Tighten the cutting-line head or blade nut
securely.
Cutting-line is not wound properly or has unequal
line lengths.
Rewind the cutting-line and cut to equal
lengths.
Damaged blade. Replace the blade.

Honda HHT35S Specifications

General

Displacement	35.8 cc
Fuel Type	Unleaded Gasoline
Handle Type	Loop
Cutting Head	Semi-matic (bump feed)
Fuel Tank Capacity	0.17 gallons
Power Output	1.3 HP
Cutting Width	17 inches
Engine	4-stroke
Shaft Type	Straight shaft
Weight	15 lbs