19
5. PRE-OPERATION CHECKS - continued
Engine Oil Level
Check the engine oil level with the engine stopped and the mower on a level
surface.
1. Clean the area around the oil filler cap.
2. Remove the oil filler cap, and wipe the dipstick clean.
3. Insert the dipstick without screwing it into the filler neck. Remove it and
check the oil level shown on the dipstick.
4. If the oil level is low, add the recommended oil (see page 46) to reach the
upper limit mark on the dipstick. Do not overfill.
5. After checking the engine oil level, screw in the oil filler cap/dipstick
securely.
To Next Page
Loading...
Need help?
General
