ENGINE OIL FILTER
NOTE:
2. Change the filter after draining the engine
oil
1. Remove the oil filter bolts (1) and cover
(2).
2. Remove the oil filter element (3) from the
cover.
3. 3. Check that the O-ring (4) on the oil
filter cover is in good condition.
(1) Oil filter bolts (2) Cover
4. Insert a new oil filter element. Check that
all parts are installed as shown.
5. Install the oil filter cover.
Oil Filter Bolt Torque: 8-12 N m (0.8-1.2
kg-m, 5-9 ft-lb)
6. Perform steps 6-9 of Engine oil Change.
(3) Oil filter element (4) O-rings
53
To Next Page
Loading...
Need help?
General
