3
Install Doorbell
If you are not mounting the doorbell to the wall,
place it where you want it.
1. Mount the screw on to the wall using the
the screw sticking out from the wall.
Drill 1/4 inch holes for the anchor.
2. Hang the doorbell on the screw.
Installation
Choose a location that is not near a heat source or on something that moves
(like a door). For non-mounting locations, choose a place where the doorbell
will be easy to hear.
Install Push Button
1. Mount the push button bracket
in the desired location.
Use the screws
Use the adhesive backing. If
using the adhesive backing,
clean the surface first.
2. Snap the push button onto the
mounting bracket.
–OR–
Note: If you need to remove the push button, use a small
screwdriver to release the tab.
To Next Page
Loading...
Need help?
General
