EasyManuals Logo
Home>Honeywell Home>Thermostat>TH3210U2004

Honeywell Home TH3210U2004 User Manual

Honeywell Home TH3210U2004
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
Batteries are optional (to provide backup
power) if your thermostat was wired to run on
AC power when installed. If your thermostat
was not wired to run on AC power, then
batteries are required.
Install fresh batteries immediately when the
low battery icon appears. The icon appears
about two months before the batteries are
depleted.
Even if the low battery icon does not appear,
you should replace batteries once a year, or
before leaving home for more than a month.
If batteries are inserted within two minutes, the
time and day will not have to be reset. All other
settings are permanently stored in memory,
and do not require battery power.
NOTE: When replacing batteries, alkaline
batteries are recommended.
Battery replacement
When the low battery
warning appears, press
gently to loosen the
thermostat and then
carefully pull it from the
wall mount.
1. When the low battery warning appears, press gently to loosen the thermostat
and then carefully pull it from the wall mount.
2. Insert two AA alkaline batteries in the back of the thermostat as shown.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Home TH3210U2004 and is the answer not in the manual?

Honeywell Home TH3210U2004 Specifications

General IconGeneral
BrandHoneywell Home
ModelTH3210U2004
CategoryThermostat
LanguageEnglish

Related product manuals