Honeywell 1900GSR-2 User Manual

7 - 27
UPC-E0 Addenda Required
When Required is scanned, the scanner will only read UPC-E bar codes
that have addenda.
Default = Not Required.
UPC-E0 Addenda Separator
When this feature is On, there is a space between the data from the bar
code and the data from the addenda. When turned Off, there is no space.
Default = On.
UPC-E0 Check Digit
Check Digit specifies whether the check digit should be transmitted at the
end of the scanned data or not. Default = On.
* Not Required
Required
Off
* On
Off
* On

Honeywell 1900GSR-2 Specifications

General

Brand	Honeywell
Model	1900GSR-2
Category	Barcode Reader
Language	English