LonWorks Bus I/O Modules Product Data
Copyright © 2019 Honeywell GmbH ● All Rights Reserved EN0Z-0980GE51 R0119
GENERAL
The CentraLine LONWORKS Bus I/O Modules communicate
via the L
ONWORKS Bus.
These pluggable CentraLine L
ONWORKS Bus I/O modules
consist of a terminal socket and a removable electronic
module, allowing the socket to be mounted and wired before
the electronic module is installed. All such electronic modules
can be swapped out without disrupting the power and bus
connections: Simply unplug the “old” and insert the “new”
module.
WARNING
Risk of electric shock or equipment damage!
► Do not touch any live parts in the cabinet.
► Disconnect the power supply before you start to install
the control system. More than one disconnect switch may
be required to de-energize the system.
► Do not reconnect the power supply until you have
completed the installation.
► Unused terminals must be closed (by completely
screwing in the terminal screws), thus preventing the
accidental touching of “live” parts.
Software updates, configuration, and commissioning are all
done automatically by the controller for all L
ONWORKS Bus I/O
Modules.
The L
ONWORKS Bus I/O Modules may be used with any CPU
supporting L
ONWORKS Bus communication (e.g., the LION,
EAGLE, etc.).
FEATURES
Plug-and-play functionality for easy maintenance.
Pluggable L
ONWORKS Bus I/O modules can be exchanged
without rewiring. Further, the separate installation of
terminal sockets and electronic modules lower risk of
damage and theft in the construction phase.
Fast wiring with state-of-the-art push-in terminals (screw-
type terminals also available) and bridge connectors.
Wide range of sensors supported (NTC20kΩ, NTC10kΩ,
PT1000-1/-2, Johnson A99 PTC, NI1000TK5000, PT3000,
Balco500, 0/2…10 V, 0/4…20 mA).
Binary input LEDs of the CentraLine L
ONWORKS Bus I/O
Modules can be configured for status display (off / yellow)
or alarm display (green / red) per channel.
Configurable safety position for outputs, in case of loss of
communication with the controller.
Max. wiring flexibility due to optional accessories like
auxiliary terminals and cross-connectors.
Can be mounted in small installation housings
Flexible mix of L
ONWORKS Bus I/O modules covering all
your application requirements.
To Next Page
Need help?
General
