General safety instructions
3
Contents
1. General safety instructions .................................... 3
1.1. Commissioning the relay module HC60NG........... 3
2. Overview ............................................................... 4
2.1. Pre configured kit Y6630D1007............................. 4
2.2. Single provided devices......................................... 4
3. Installation ............................................................. 4
3.1. Installation relay module HC60NG ........................ 4
3.2. Installation room unit HCW 80............................... 6
4. Checking ............................................................... 7
4.1. System check........................................................ 7
4.2. Radio transmission check...................................... 7
5. Teach-in (single devices only)............................... 7
5.1. Assignment to the relay module HC60NG............. 7
5.2. Failed teach-in....................................................... 7
6. Communication loss .............................................. 7
7. Factory reset of relay module HC60NG................. 7
8. Particular features of the room unit HCW 80......... 8
8.1. Operation............................................................... 8
8.2. Limiting the adjustment range ............................... 8
8.3. Fixed control parameters....................................... 8
9. Changing batteries ................................................ 8
10. Appendix ............................................................... 9
10.1. Help with problems................................................ 9
10.2. Specifications HCW 80.......................................... 9
10.3. Specifications HC60NG......................................... 9
10.4. Device and function definition in accordance
with EN 60730-1.................................................... 9
10.5. WEEE directive 2002/96/EC – Waste Electrical
and Electronic Equipment directive ....................... 9
1. General safety
instructions
1.1. Commissioning the relay module
HC60NG
Danger
Danger to life through electric
shock!
Contacts that are open are live.
► Ensure that the device is de-
energised.
► Have all the work carried out by
authorised qualified personnel.
► Observe the valid local regulations
during the installation.
WARNING
Insufficient data transfer!
Interference of the relay module
HC60NG in the device through metallic
objects or further frequency devices.
► Mount the device with a distance of at
least 30 cm to metallic objects such
as wall boxes or boiler housings
according to the DECT standard, etc.
► Do not mount on metal wall boxes.
WARNING
Damage to the device!
Short-circuiting through humidity and
moisture.
► Mount the device at a site that is
protected against humidity and
moisture.
WARNING
Damage to exposed components!
Destruction of the electronic
components through electrostatic
discharges.
► Do not touch the components.
► Touch an earthed piece of metal to
discharge static electricity from your
body.
To Next Page
Loading...
Need help?
General
