HEATING CONTROLS
DT92E
WIRELESS DIGITAL THERMOSTAT
FEATURES
■
Energy saving TPI control
■
ECO button for energy saving mode
■
Countdown display of time remaining in
ECO energy saving mode
■
30 metres wireless range
■
Two way wireless communications
■
Signal strength indicator
■
Slim modern design
■
Extra large LCD with easy to read text
■
Volt free connections
■
Simple user operation
■
Room temperature inquiry
■
Heating ‘ON’ indicator
■
5 to 35°C setpoint range
■
Battery powered thermostat
(with low battery indication)
■
Two year battery life
■
‘OFF’ setting with adjustable OFF setpoint
■
Actual space temperature display
■
Mains or low voltage switching
APPLICATION
The DT92E wireless digital room thermostat has been designed
to provide automatic temperature control of gas or oil fired boiler
systems, underfloor heating, electric heating and zoning systems.
Energy efficiency is addressed by state of the art control
performance qualifying it as a Load Compensator.
The DT92E has an ECO button energy saving feature which gives
timed setback or boosts temperatures to reduce energy demand.
This is a TPI (Time Proportional & Integral) control product as
defined in the Building Regulations, which make boilers operate
more efficiently and provides close, accurate control. This is
continually improved by a self learning adaptive capability.
The ‘OFF’ setting can be used for frost or hypothermia protection,
assuming the system time control is also switched on.
'Installer Mode' allows control to be matched to the system and
user requirements, adapting minimum on or off times, set point
controls etc.
The volt free connections are ideal for use with combination
boilers or heating zones.
© Honeywell Control Products and Systems
New Pages (dt92E).qxd:Dt92E 30/03/2009 15:46 Page 1
To Next Page
Need help?
General
