EN0H 8580 UK07 R1 09/15
DT92
WIRELESS DIGITAL ROOM THERMOSTAT
PRODUCT SPECIFICATION SHEET
The new DT92 family of wireless digital room
thermostats is a range of market leading products
designed to provide comfort with economy in modern
heating systems.
Comprising a battery-powered room thermostat and a
mains switching relay box, DT92 features robust 2-way
RF communications between the units. This allows
signal strength testing to help the installation process.
The RF link between both units is already set (pre-
bound) at the factory, so the product is ready for
immediate installation.
Energy efficiency is addressed by state-of-the-art TPI
control performance and an ECO button energy saving
feature. Applications include control of gas or oil-fired
boiler systems, underfloor heating, electric heating and
zoning systems.
With a modern fresh look that complements any style
of décor, and a range of valued features for users and
installers alike, DT92 sets the standard for simple
environmentally-friendly wireless room thermostats.
FEATURES
•
Energy saving TPI control performance
• Advanced self-learning control adapts to the
env
i
ronment and ensures close temperature
control w
ith minimum energy
usage
• Slim modern styling
• Simple user interface with large high contrast
display
and easy
-to-read characters
• Display shows room temperature, with option to
inquire about setpoint
• 5°C to 35°C setpoint range with 0.5°C
increments, using ▲ and ▼buttons
• Off/standby button, allowing manual switch off,
w
ith frost protection activ
e
• Adjustable off/standby setpoint 5°C to 16°C or
DT92 can be set to off completely
• Room thermostat is battery powered by 2 x AA
(LR6) alkaline cells giv
ing up to 4 years battery
life (minimum 2 years), with battery low warning
• Simple battery change by unclipping front cover
• Relay switching box is 230Vac mains powered
w
i
th 24…230Vac SPDT potential-free contacts
• 5 A resistive, 3 A inductive switch rating
• 2-way RF communications at 868MHz radio
frequency
band, giving ty
pical reliable range of
30m in houses
• Transmission and signal strength test features
to guarantee good room thermostat placement
• RF link between units is pre-set at the factory
• Installer Mode allows operation to be
customised for the application and the needs of
the user
• NVRAM storage of setup parameters, ensuring
these are nev
e
r lost
• Setpoint limits can be programmed in
• Special ‘fail-safe’ mode, should RF
communications be temporarily lost
• Manual override possible at relay box
• Optional table stand supplied for thermostat
FEATURES UNIQUE TO DT92E ECO MODEL
• Energy saving ECO button allows user to
change to a low
er, energy sav
ing setpoint for a
timed period of their choosing (1…24 hours)
• Display shows countdown of time remaining in
ECO energy
sav
ing mode
To Next Page
Need help?
General
