INSTALLATION GUIDE CARE
EN1B-0478GE51 R1216 20
9. Confirm the warning by clicking Yes button.
RESULT: The driver will be installed successfully as indicated by the final
message box.
10. Click Close button.
USB Driver Installation for Windows 10
For controllers with firmware 4.00.00 or higher, the appropriate driver is
automatically installed with a Windows update. For firmware 3.04.05 or lower, the
automatic installation does not work: Please download the appropriate USB driver
prior to the installation at:
http://catalog.update.microsoft.com/v7/site/ScopedViewRedirect.aspx?updateid=37
e35bd4-d788-4b83-9416-f78e439f90a2
Please connect the controller to the PC as described in the "USB Driver Installation
for Windows 8" section and perform the general installation procedures for drivers
in Windows 10.
To Next Page
Loading...
Need help?
General
