Cautions
1. This sensor is used only for pipeline gas (methane), can not be used to
determine liqueed gas in cylinders;
2. It is forbidden to make changes of the internal structure of the device;
3. Do not directly expose the highly concentrated ammable gas to the sensor (eg
lighter gas, clean natural gas, etc.), this may result in a partial / total reduction in
the sensitivity of the sensor or its damage;
4. Avoid a large number of solid aerosols, insecticides, paints, glues, solvents
and other similar substances near the sensor. This can provoke a false alarm and
adversely aect the life of the device;
5. The operating life of the internal sensor is 5 years. Please pay attention to
the service life of the device and perform timely maintenance or replacement of
necessary elements;
6. Regularly pay attention to the work of the sensor. In case of a malfunction, do
not disassemble the device yourself. It is necessary to contact the store or the
manufacturer in a timely manner and describe in detail the signs of the problem
so that the after-sales service representative can advise you. If the product needs
to be returned to the factory for maintenance, adhere to the safety practices when
using gas.
Rights and responsibilities of the company
1. This manual contains a detailed description of the rules for using the device, its
technical parameters and other information, but the company reserves the right to
make changes to the manual without further notice;
2. The shown sensor may be slightly dierent from the actual device, the actual
appearance of the product prevails;
3. This information is intended only for familiarization, it is not a form of obligation;
4. All rights reserved, the company reserves all rights. No part of this manual may
be reproduced in full or in part, copied by any organization or person without prior
written consent and should not be distributed in any form.
Faults and troubleshooting
To Next Page
Loading...
Need help?
General
