Honeywell PID-95P User Manual

GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
CS-2044 Rev. C page 2 of 2
www.gamewell-fci.com
Engineer’s Specifications
Addressable interface devices shall be provided for the
monitoring and supervision of contact type devices con-
nected to the Fire Alarm Control Panel. The devices shall
monitor a normally open dry contact. The addressable
interface devices shall communicate to the main control
panel via the analog addressable circuit. The interface
device shall be Gamewell-FCI PID-95P or PID-95.
Specifications
PID-95P
Standby Current: 0.0005A, 0.0008A
Alarm Current: 0.0015A
Operating
Temperature: 32°F to 120°F (0°C to 49°C)
Relative Humidity: 93%, non-condensing
Dimensions: 4" x 4.688" (10.16 cm x 11.908 cm),
double gang backbox
PID-95
Standby Current: 0.0005A, 0.0008 A
Alarm Current: 0.0015A
Operating
Temperature: 32°F to 120°F (0°C to 49°C)
Relative Humidity: 93%, non-condensing
Dimensions: 4" (10.16 cm) square backbox with
blank cover plate
Ordering Information
Part NumberDescription
PID-95 Addressable point identification device
for monitoring contact devices
PID-95P Addressable input interface device
mounted on 4.688" (11.908 cm) plastic plate
70839 Trim ring for flush-mounting on the PID-95P

Honeywell PID-95P Specifications