Honeywell RDWL515A2000 User Manual

7
Maintenance
Your doorbell and push button require no maintenance except to periodically
change the batteries.
If using the correct batteries, battery life should be approximately:
• Up to 2 years for the doorbell; replace with 3 AA alkaline batteries
• Up to 2 years for the push button; replace with a CR2032 lithium battery
Low Battery Notification

yellow every 6 seconds until batteries are replaced.
When the push button batteries are low, two beep sounds are heard after the
normal tune.
Reset
This process removes all pairings, including the push button that came with
this doorbell:
1. Remove the doorbell battery.
2. Press and hold the Setting button, and replace the battery at the same
time.
3. The halo light will circle, and the doorbell is returned to its factory default
settings.
Specications
Doorbell Push Button
Operating Temperature  
ActivLink™ 916.8 MHz 916.8 MHz
  
 84dBA -
RF Power - <1.2W
Battery Type  
 Up to 2 years Up to 2 years
Rain proof N/A Pass UL1598 rain test.

Honeywell RDWL515A2000 Specifications

General

Brand	Honeywell
Model	RDWL515A2000
Category	Accessories
Language	English