Honeywell VisionPRO 8000 Installation

VISIONPRO® 8000 SMART THERMOSTAT
5 33-00096—05
SYSTEM INSTALLATION
When Installing this Product...
1. Read these instructions carefully. Failure to follow the
instructions can damage the product or cause a haz-
ardous condition.
2. Check the ratings given in the instructions to make
sure the product is suitable for your application.
3. Installer must be a trained, experienced service
technician.
4. After completing installation, use these instructions
to verify the product operation.
Finding Your Password (Date Code)
You will need the thermostat password to:
• Make changes to Installer Setup
• Perform an Installer Test
• Reset Thermostat to Factory Default Settings
The password (date code) is located on the back of the
thermostat (see Fig. 2)
Fig. 2. Finding thermostat password.
You can also find the password (date code) by pressing
MENU, selecting Dealer Information and then scrolling
down to see the Date Code.
Residential/Résidentiel 1-800-468-1502 http://yourhome.honeywell.com Commercial/Commerciale 1-888-245-1051 http://customer.honeywell.com Honeywell, Golden Valley, MN 55422
RoHs Compliant
Conformité RoHs
Assembled in Mexico
Assemblé au Mexique
TH8321WF1001
1
1524
M37810A
M35343B
Password
(Date Code)

Honeywell VisionPRO 8000 Specifications

General

Display	Touchscreen
Programmability	7-day programmable
Operating Modes	Heat, Cool, Auto, Off
Fan Modes	Auto, On, Circulate
Energy Star Certified	Yes
Backup Battery	Yes
Filter Change Alert	Yes
Installation	Wall-mounted
Connectivity	Wi-Fi
Power Source	Battery or Hardwired
System Compatibility	Heat pump, Gas, Oil, Electric
Stages	2 heat/2 cool
Display Type	Touchscreen
Temperature Range	40°F to 90°F
Humidity Control	Yes
Compatibility	Compatible with most heating, cooling, and heat pump systems