Honeywell Wi-Fi VisionPRO 8000 - User Manual

Wi-Fi VisionPRO
®
8000
Installation Guide
Current display. Underlined label
signifies the current display.
Mode control buttons. Use to change
settings for Fan or System Heat/Cool.
Menu. Select options to: set schedules,
view equipment status, change IAQ
settings, access installer options*, etc.
Current status. Shows system mode
(heat/cool), outdoor temperature and
humidity.
Current schedule. Shows desired
temperature and schedule status.
Indoor conditions. Shows indoor
temperature and humidity.
Current Time.
Alert Light. On when alert
message is active or system is set to
Em Heat.
Reference to key features
* Password is the date code.

Summary

Getting started

Installing the thermostat

Terminal Designations

Performing installer setup

Wiring guide-conventional systems

Wiring guide-heat pump systems

Connecting to Wi-Fi

Finding the password (Date Code)

Finding the password

Locate the date code needed for thermostat setup or installer tests.

Making changes to Installer Setup and performing an Installer Test

Checking signal strength

Verify the Wi-Fi connection quality and understand signal strength indicators.

Connecting to Wi-Fi later

Instructions for connecting to Wi-Fi after initial setup.

Unsuccessful connection

Connecting to a hidden Wi-Fi network

Specifications and replacement parts

Model Numbering

Need Help?

Honeywell Wi-Fi VisionPRO 8000 Specifications

General

Brand	Honeywell
Model	Wi-Fi VisionPRO 8000
Category	Thermostat
Language	English