ii
blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
• Only use the attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of
time.
• Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
• WARNING – To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
• The mains plug is used as disconnecting device and shall remain readily operable.
• The apparatus is unsuitable for use in air-handling spaces.
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
• Class I apparatus shall be connected to a mains socket outlet with a protective earthing connection.
Network Security
Placement
• Please put the device in a safe place, lock the cabinet and keep the keys well.
• The access control system of the central control room should be under strict management.
• Any person except authorized maintainer is forbidden to disassemble or change parts of device.
• It is forbidden to communicate X-618 system with third party system unless updating the configuration.
Password Precaution
• Please change the password during the system deployment.
• Users need to change the password regularly.
• The password with six numbers is preferred.
To Next Page
Loading...
Need help?
General