12.
Maintenance
IMPORTANT! Ensure the vacuum cleaner is not connected to the power supply
when performing any maintenance procedures. Use a damp cloth and mild
detergent when cleaning the appliance.
Vacuum Cleaner Storage
When not in use, ensure the cleaner is not connected to the power supply, and pull the power cable
gently out of the power socket. Press the automatic cord rewind button to reel in the power cable fully.
Hang the floor brush onto the floor park. The powerhead must be stored separately.
Store the cleaner in a cool dry location.
IMPORTANT! Press the dust container release button to remove the dust
container, do not pull the clip on the handle of the dust container to remove the
dust container which can cause damage to the cleaner and dust container.
Remove the rubbish in the dust canister frequently to avoid unnecessary
blockages that may lead to failure of the motor in prolonged occurrences.
IMPORTANT: Do not allow the dust to go past the max. line.
The bin must be emptied before dust reaches the max. line.
Clean the dust canister only after the power cable of the cleaner has been
removed from the power supply.
Hold the dust canister over the rubbish bin (bag), press down the dust
release button of the dust canister, the bottom cover of the dust canister
will automatically open allowing you to clear and empty the dust canister.
Dust Container Cleaning
Dust Release
Button
To Next Page
Loading...
Need help?
General
