Important
This vacuum cleaner is not free standing. In
between uses or when carrying out any
maintenance always lie flat on the floor in a
suitable location so it does not become a trip
hazard or can be stepped on.
4
Assembly:
Line up the connector on
the Reach Wand with the
Powered Head. Push the
Reach Wand down onto the
Powered Head until it clicks
into place.
Push the Handheld down
onto the Reach Wand until
it clicks into place.
The vacuum cleaner is not free
standing and in between uses
must always be placed in the wall
bracket or laid flat on the floor, in
a suitable location so it does not
become a trip hazard or can be
stepped on.
2 3
WARNING
To reduce the risk of personal injury, remove
battery before cleaning or servicing.
!!
!!
To Next Page
Need help?
General
