Hoover BHBS 172 UKT User Manual

EN - 15 -
Replacing the light bulb
To replace the bulb in the fridge compartments;
1. Unplug your fridge freezer.
2. Using a screwdriver, carefully remove the light cover from the top panel. (a)
3. Replace with a 15 watt bulb. (b)
4. Reinstall the light cover. (c)
5. Wait for 5 minutes before re-plugging the fridge in and restore the thermostat to its
original position.
Replacing LED lighting
If your refrigerator has LED lighting contact the help desk as this should be changed by
authorized personnel only.
• When there is more than 5 mm of frost on the shelves, defrosting must be done.
• Before defrosting operation, place the frozen food in a cool place after wrapping them in
sheets of newspaper in order to obtain its temperature steady for long time.
• To accelerate the defrosting process place one
or more basins of warm water in the freezer
compartment.
• Dry the inside of the compartment with a
sponge or a clean cloth.
• Once the unit has been defrosted, place
the food into the freezer and remember to
consume them in a short period of time.

Hoover BHBS 172 UKT Specifications

General

Star rating	4*
Freezer position	Bottom-placed
Freezing capacity	5 kg/24h
No Frost (freezer)	-
Fast freeze function	Yes
Freezer net capacity	94 L
Storage time during power failure	11 h
Door hinge	Right
Door assembly	Door-on-door
Product color	White
Shelves material	Glass
Appliance placement	Freestanding
Noise level	38 dB
Total net capacity	242 L
Connected load	- W
Energy efficiency scale	A+++ to D
Annual energy consumption	277 kWh
Lamp type	LED
Fridge net capacity	148 L
Fridge door balconies	3
Package depth	577 mm
Package width	584 mm
Package height	1834 mm
Package weight	57300 g
Country of origin	China

Weight and Dimensions

Width	540 mm
Height	1770 mm
Weight	53000 g
Installation compartment depth	550 mm
Installation compartment width	560 mm