1. Combination carpet and floor
power nozzle: automatically
adjusts to different carpet pile
heights.
2. Headlight
3. Spring latch: locks extension
wands together or locks wand to
nozzle or tool.
4. Wand storage clip: place cleaner
on its end and hook clip onto bottom
of cleaner.
5. Extension wands: used with rug
and floor nozzle. One or both
wands may be used with cleaning
tools.
6. Wand/tool latch: used to lock hand
grip to extension wands or cleaning
tools.
7. Floor surface selector button*:
push button toward “RUG” for carpet
cleaning or “BARE” for hard surface
floor cleaning.
8. Hand grip
9. Remote ON/OFF switch*: located
on the hand grip for convenient
cleaner operation.
10.Remote variable speed control*:
allows user to manually select
cleaner speed at the hand grip.
11. Receptacle: connect power nozzle
cord underneath hand grip.
12. Dusting brush
13. Crevice tool
14. Hard floor tool
15. Furniture nozzle
16. Power ON light*: glows when
cleaner can be controlled at the
hand grip.
17. Suction regulator: close for
maximum suction, open if power
nozzle is difficult to push or light
weight rugs or draperies are being
cleaned.
18. Large wheels: provide easy towing
when cleaner is pulled over carpet,
area rugs and door sills.
19. Cord rewind pedal: step on pedal
to rewind cord for storage. Hold
plug until cord is rewound.
20. Micro filter: aids in filtration of dirt
particles.
21. Tool lid: pull up on edge of lid in
recessed area.
22. Bag lid latch: lift to open bag lid.
23. ON/OFF pedal: conveniently
located on top of cleaner.
24. Check bag indicator: shows red
when paper bag should be
checked for fullness.
25. Hose connector
26. Receptacle: connect power nozzle
cord to canister cleaner.
27. Carrying handle
28. Belt check window: motor pulley
will be visible in window if belt is
broken.
*Available on some models.
This cleaner is intended for household
use.
1
2
3
4
5
6
6
17
11
11
12
13
14
16
18
19
20
21
22
23
24
25
26
27
28
15
7
7
8
8
9
9
10
10
1
1
2
2
The assembled cleaner will look like
the drawing.
Operate cleaner only at voltage speci-
fied on data plate on bottom of clean-
er.
Unpacking
Cleaner
description