DOOR and FILTER
Opening the Door
EN 11
Filter Care Indicator
Filter
IMPORTANT: To maintain the efficiency of the
dryer check that the filter is clean before
each drying cycle.
Do not operate the dryer without the filters.
Clogged filters can increase the drying time
and cause damage which may result in
expensive repair costs.
lint
1 . R e m o v e t h e
kickplate.
2. Turn the
locking levers anti-
clockwise and pull out
the front cover.
3. Gently remove the
filter frame and clean
any dust or fluff with a
cloth from the filter. Do
not use water to clean
the filter.
4. Remove the sponge
gently from its place
and then wash the
sponge by holding it
under a running tap
turning it so to remove
any dust or fluff.
5. Refit the front cover
ensuring it is in the
c o r r e c t w a y ( a s
indicated by the arrow)
and pushed firmly into
place. Lock the
levers by turning them
clockwise.
6. Refit the kickplate.
three
three
DO NOT USE WATER TO CLEAN THE FILTER.
THE LINT TRAP HAS TO BE CLEANED
FREQUENTLY
To Next Page
Loading...
Need help?
General