Hoover EVO User Manual

9
Lift the tab on the exhaust lter cover grille and
remove from the cleaner.
Wash the exhaust lter under hand warm water
until the water runs clean. Remove excess water
by shaking and leave to dry for 24 hours.
Refit filter only when completely dry.
DO NOT USE HOT WATER OR
DETERGENTS.
Remove the exhaust lter.
CLEANING THE EXHAUST FILTER
CLEANING THE PRE-MOTOR FILTERS
Press the bin release buttons
and remove the dust bin from
the cleaner.
Remove the pet hair remover
turbo brush from the top cover
of the cleaner.
1
1
Place the bin on a at surface
and press the lter access
button to open the top cover of
the bin.
2
2
Remove the BLUE lter pack
(containing the pad lter).
3
3
Separate the exible lter
pad from the lter frame by
pulling the tab or pushing from
underneath.
Gently tap the exible lter
pad against the side of a bin to
release excess dust.
Wash the pad lter thoroughly
under hand warm water,
gently squeezing the pad until
the water runs clean.
Remove excess water by
squeezing and leave to dry for
24 hours.
DO NOT USE HOT WATER
OR DETERGENTS.
4
When completely dry
reassemble and refit filter
pack to the cleaner.
65
!
IMPORTANT! For optimum performance,
always keep your lters clean.
!
!
!
IMPORTANT! For optimum performance,
always keep your lters clean. We recommend
that the exhaust lter should be washed every
3 MONTHS.
IMPORTANT! For optimum performance, shake off excess dust from the lters regularly.
We recommend that the exible lter pad is washed every 3 MONTHS.
!
!
DM EVO IM 48002652.indd 9 12/10/2010 09:33:35

Hoover EVO Specifications

General

Brand	Hoover
Model	EVO
Category	Vacuum Cleaner
Language	English