12
8. STORAGE
STORING CLEANER
Turn cleaner OFF and disconnect from electrical outlet.
• Empty and rinse Clean Water Solution Tank and Dirty Water Tank. Allow to air dry.
• Make sure that nothing is pressing on the nozzle squeegee.
• Do not store cleaner on a wood surface unless cleaner is completely dry.
• Store approriately indoors in a dry place. Do not expose machine to freezing tempuratures.
• Water will drip from the brushes and underside of the product after use and may puddle. To avoid damage
to wood and laminate flooring and to avoid potential slip hazard, after use A) do not leave the product on wood
and laminate surfaces and remove to a hard surface and B) place unit on absorbent material (such as a towel)
to soak up drips.
To Next Page
Loading...
Need help?
General
