K. Crevice Tool*
L. Squeegee Tool*
HOW TO ASSEMBLE
NOTE: PHILLIPS SCREWDRIVER NEEDED FOR ASSEMBLY.
ATTACH HANDLE
1. Position upper handle and slide down into carpet washer base (Fig. 2)
2. Insert both screws and tighten with screwdriver (Fig. 3).
PLACE SOLUTION/ WATER TANK
3. Position bottom of tank onto Carpet Washer (Fig. 4).
4. Push tank handle while supporting back of cleaner with other hand until Solution Tank clicks into
place (Fig. 5).
5. Check to make sure tank is securely latched.
STORE TOOLS
6. Place tools and hose into Mesh Tool Storage bag provided.
7. Mesh Tool Storage Bag should not be hung on the Carpet Washer while the Carpet Washer is in use.
8. Mesh Tool Storage Bag can be conveniently stored either on the back of the unit or hung elsewhere
by the provided hook (Fig. 6).
CORD STORAGE
9. Wrap cord around cord hooks for convenient storage. Attach the plug end to cord.
ATTENTION
Prior to use, consult with Carpet Manufacturer on cleaning recommendations for natural fiber
To Next Page
Loading...
Need help?
General
