12
D
B
Unplug deep cleaner from electrical outlet.
_,- Remove solution and recovery tanks to prevent possible leaks.
_,- Lift up on top of nozzle (A) and slide off cleaner (Fig. 41).
_,- Wipe debris off nozzle and front of cleaner with a damp cloth.
_,- Tilt cleaner back, raising front of cleaner off floor. Slide nozzle
(B) up from bottom of cqeaner (Fig. 42).
_,- Press on upper portion of nozzle to snap in place.
Clean the brushes
Unplug deep cleaner from electrical outlet.
_,- Remove solution and recovery tanks to prevent possible leaks.
_,- Tilt cleaner back so handle rests on the floor:
_,- Pull brush assembly firmly to remove (Fig. 43).
_,- Rinse brushes under running water.
_,- Align posts (C) on brush assembly with slots (D) in cleaner
(Fig. 44).
_,- Turn brushes slightly, to align square post (E) with square hole
(F) in cleaner (Fig. 44).
_,- Press brush assembly firmly and snap in place.
Clean the brush filter
Unplug deep cleaner from electrical outlet.
_,- Remove solution and recovery tanks to prevent possible
leaks.
_,- Tilt cleaner back so handle rests on the floor.
_,- Squeeze filter frame (G) and pull it out until it stops (Fig. 45).
_,- Wipe debris off filter.
_,- Slide filter back into place.
To Next Page
Loading...
Need help?
General
