m
A. Handle Wand
/
B. Vacuum Base/Dirt Cup/Handle Grip
C. 2-in-1 Combination Tool
D. Air-Powered Turbo Tool*
*Available on select models only.
Remove all parts from carton and
identify each item shown.
Make sure all parts are located before
disposing of packing materials.
CARTON CONTENTS
B (9
ATTACHHANDLE
1.2 Press lever (A) and Insert handle wand into
vacuum base.
1.3 Attach handle grip to the top ofthe handle wand.
ATTACHDIRT CUP
1.4 Place bottom of dirt cup into vacuum body first.
Pivot cup into vacuum. Press down on the dirt cup
release button to secure into place.
POSITION TOOLS
1.5 For storage mode, push dusting brush all the
way down onto crevice tool.
1.6 Snap combination tool into tool storage area (B)
on back side of vacuum.
II1_1
/ '