EasyManuals Logo

Hotpoint BFI 680 User Manual

Hotpoint BFI 680
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
D
ISHWASHER
Rinse aid.
Rinse aid makes dishes sparkle
more as it improves their drying. The
rinse aid container is situated on the
inside of the door. You should fill it
up when the rinse aid indicator light
T” flashes.
Adding rinse aid.
To open the dispenser, turn cap C
anticlockwise. Take care when you
pour in the rinse aid to avoid it
overflowing. You can regulate the
amount of rinse aid used by the
dishwasher, move the adjuster F
which you will find under lid C.
The detergent
Adding detergent
To open lid A, press button B.
The detergent should be put into the
two containers C and D.
If using a tablet, put it in container
"D".
Now you can close the lid: press it
down until you hear it click.
If it won't close
Check whether there is any
detergent residue on the edges of
the dispenser. Remove the excess.
You can choose from six different positions.
It is normally set to 4.
Before Using your Dishwasher
- The amount of rinse aid
needs to be increased if the
dishes appear dull or you can
see circular stains.
- The amount of rinse aid
needs to be reduced if the
dishes are sticky or you can
see white streaks.
Use the right amount of
detergent (see programme
chart).
Store your detergent and rinse
aid in a cool, dry place, safely
away from children.
Warning
Three-in-one dishwasher tablets are now available on the market, and combine detergent, salt and rinse aid all in one.
If the water in your area is hard or very hard, we still recommend you pour extra salt into the relevant dispenser to prevent
the formation of white streaks on your dishes or on the interior of the appliance.
Using a three-in-one product means it is no longer necessary to put rinse aid into the relevant container.
If you want to achieve perfectly dry dishes, you may add rinse aid as long as the dosage adjuster is set to no.2.
In any case, please read the manufacturer's instructions on the packet.
If you use only these products, it is normal for the salt and rinse aid indicator lights to flash permanently after a certain
number of cycles.
B
D
C
A
F
C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hotpoint BFI 680 and is the answer not in the manual?

Hotpoint BFI 680 Specifications

General IconGeneral
BrandHotpoint
ModelBFI 680
CategoryDishwasher
LanguageEnglish

Related product manuals