Hotpoint BHWD129 User Manual

&
GB
Description of the Washer-dryer and
starting a wash cycle
Detergent dispenser drawer: used to dispense
detergents and washing additives (see Detergents
and laundry).
ON/OFF button: switches the Washer-dryer on
and off.
WASH CYCLE knob: programmes the wash cycles.
During the wash cycle, the knob does not move.
FUNCTION buttons with indicator light: used to
select the available functions. The indicator light
corresponding to the selected function will remain lit.
TEMPERATURE knob: sets the temperature or the
cold wash cycle (see Personalisation).
DRYING knob: used to set the desired drying
programme (see Personalisation).
WASH CYCLE PROGRESS
indicator light s: used
to monitor the progress of the wash cycle.
The illuminated indicator light shows which phase is
in progress.
DOOR LOCKED indicator light: indicates whether
the door may be opened or not (see next page).
START/PAUSE button with indicator light: starts
or temporarily interrupts the wash cycles.
N.B. To pause the wash cycle in progress, press this
button; the corresponding indicator light will flash
orange, while the indicator light for the current
wash cycle phase will remain lit in a fixed manner. If
the DOOR LOCKED
indicator light is switched
off, the door may be opened.
To start the wash cycle from the point at which it
was interrupted, press this button again.
TEMPERATURE
knob
Detergent dispenser drawer
WASH CYCLE PROGRESS
indicator lights
FUNCTION
buttons with
indicator lights
ON/OFF button
DRYING
knob
DOOR
LOCKED
indicator light
START/PAUSE
button with
indicator light
Control panel
WASH CYCLE
knob

Hotpoint BHWD129 Specifications

General

Loading type	Front-load
Product color	White
Custom panel-ready	Yes
Appliance placement	Built-in
Door panel included	No
Washing class	A
Washing capacity	6.5 kg

Weight and Dimensions

Depth	550 mm
Width	595 mm
Height	820 mm