To Next Page

To Previous Page

Door Reversal

You will need a selection of small tools, screwdrivers, spanners etc. to carry out this

procedure.

Our Service Department can arrange for an Engineer to do the conversion for you but

a charge will be made.

WARNING: Switch off electrical supply and pull out the mains plug.

Remove all door furniture and all loose items/fittings from inside the fridge freezer.

If you have previously set up and used the fridge freezer and since decided to reverse

the doors, you must remove stored food, wrap or cover it and place into insulated

containers to keep cool/frozen whilst carrying out this operation.

Remove Top Door

1. Open the door as wide as possible.

Note : You may require assistance to do this:

2. Support the door and using a screwdriver, remove the screw

securing the top hinge.

3. Lower the top hinge and carefully tilt the door to remove the

top hinge from the cabinet. Lift the door off the centre hinge.

4. Remove the top hinge from the door.

Remove Lower Door

Note : You may require assistance to do this:

5. Open the lower door and while supporting the door, remove the spacing

washers and pin from the centre bracket.

Note which way up the pin is fitted.

6. Lift the door off the bottom hinge.

7. Take the two screw

covers off the

centre hinge.

9. Remove any spacing washers fitted to the bottom hinge and store safely.

8. Unscrew the two

screws to remove the

centre hinge.

CLEANING &

MAINTENANCE

Hotpoint FFA64 User Manual

Questions and Answers: