Hotpoint FFU4DG X MTZ User Manual

GB
5
Installation
!Beforeplacingyournewapplianceintooperationpleaseread
these operatinginstructions carefully. Theycontain important
information forsafe use,for installationand for careof the
appliance.
!Pleasekeeptheseoperatinginstructionsforfuturereference.
Passthemontopossiblenewownersoftheappliance.
Positioning and connection
Positioning
1. Placetheapplianceinawell-ventilatedhumidity-freeroom.
2. Donot obstruct the rear fangrills. The compressor and
condensergiveoffheatandrequiregoodventilationtooperate
correctly and save energy.
3. Leaveaspaceofatleast10cmbetweenthetoppartofthe
applianceandanyfurnitureaboveit,andatleast5cmbetween
thesidesandanyfurniture/sidewalls.
4. Ensuretheapplianceisawayfromanysourcesofheat(direct
sunlight,electricstove,etc.).
5. Inordertomaintainthecorrectdistancebetweentheappliance
andthewallbehindit,fitthespacerssuppliedintheinstallation
kit,followingtheinstructionsprovided.
Levelling
1. Installtheapplianceonalevelandrigidfloor.
2. Ifthefloorisnotperfectlyhorizontal,adjusttherefrigeratorby
tightening or loosening the front feet.
Electrical connections
After theappliance hasbeen transported, carefully place it
vertically and waitat least3hours beforeconnecting itto the
electricitymains.Beforeinsertingtheplugintotheelectricalsocket
ensure the following:
• Theapplianceisearthedandtheplugiscompliantwiththelaw.
• Thesocketcanwithstandthemaximumpoweroftheappliance,
whichisindicatedonthedataplatelocatedonthebottomleft
sideofthefridge(e.g.150W).
• Thevoltagemustbeintherangebetweenthevaluesindicated
onthedataplatelocatedon the bottomleftside(e.g.220-
240V).
• The socket iscompatible withthe plugof the appliance. If
thesocketis incompatible withthe plug, askan authorised
techniciantoreplaceit(see Assistance).Donotuseextension
cordsormultiplesockets.
!Oncetheappliancehasbeeninstalled,thepowersupplycable
and the electrical socket must be easily accessible.
!Thecablemustnotbebentorcompressed.
!Thecablemustbecheckedregularlyandreplacedbyauthorised
techniciansonly(seeAssistance).
! The manufacturer declines any liability should these safety
measures not be observed.
Start-up and use
Starting the appliance
! Aftertransportation ofthe appliance, carefully place itin an
uprightpositionandwaitatleast3hoursbeforeconnectingitto
theelectricitymains,tomakesureitoperatesasitshould.
• Cleantheinsideoftherefrigeratorwellusingwarmwaterand
bicarbonateofsodabeforeplacingfoodinsideit.
• Theappliancecomeswithamotorprotectioncontrolsystem
whichmakesthecompressorstartapproximately8minutes
afterbeingswitchedon.Thecompressoralsostartseachtime
thepowersupplyiscutoffwhethervoluntarilyorinvoluntarily
(blackout).
Freezer Compartment
When theproduct isswitched onthe freezercompartment is
settoitsdefaultvalueof-18°C.WerecommendthattheQUICK
FREEZEfunctionisset(thefreezerstatusbarcontinuestodisplay
thesetvalue)inordertoacceleratethecoolingprocessofthe
compartment;whentheinsideofthecompartmenthasreached
itsoptimaltemperaturethefunctionwillbedeactivatedandthe
foodmaybeplacedinside.
Navigating the display
Setting the temperatures:
If theproduct is switched on, therefrigerator and freezer
compartmentdisplayswillindicatethetemperaturevaluessetat
thatmoment.Tochangethem,simplypressthe- and + buttons
correspondingtothecompartmentforwhichyouwishtochange
thesettemperature.Morespecifically,eachtimethebuttonsare
pressed,thetemperatureincreasesordecreasesandthelevelof
coldgeneratedinsidethecompartmentisadjustedaccordingly.
Thetemperaturevaluesthatmaybeselectedfortherefrigerator
compartmentare+8°C,+7°C,+6°C,+5°C,+4°C,+3°Cand+2°C,
whilethevaluesthatmaybesetforthefreezerare–18°,-19°,-
20°,-21°,-22°,-23°,-24°,-25°,-26°.Whenthe“I-CARE” function
isactive,theapplianceautomaticallyadjuststhetemperatures
accordingtotheconditionsinsideandoutsidetherefrigerator,in
ordertominimisetheamountofenergyconsumed;theactivation
of this function is signalled by the I-CARELED onthekeypad
lightingup.
WhentheHOLIDAY functionisactivethetemperaturemaynot
beadjusted,howevertheapplianceadjustsitselfautomaticallyso
thattheoptimalsettingsforthesituationareused:+12°C for the
refrigeratorcompartmentand-18°Cforthefreezercompartment.
The activation of this function is indicated by the HOLIDAY LED
lightingup.
Twominutesafterthemostrecentuserinteraction,thedisplay
entersitsenergysavingmode.Toexittheenergysavingmode,
simplypressanybuttonoropentherefrigeratordoor.
Toactivateanddeactivatethefunctions,simplypresstherelevant
button;thefunctionstatuswillbesignalledbythecorresponding
LEDonthekeypadswitchingonoroff.
Several ofthe functions (, QUICK FREEZE, I-CARE) are
incompatiblewithothers(HOLIDAY,...);rememberthatthereis
apre-establishedorderofprioritywhichwillhelpyoutooperate
theproductinthebestpossibleway.
Chiller system
No Frost
TheNoFrost system circulates coldaircontinuouslytocollect
humidityandpreventiceandfrostformation.Thesystemmaintains
an optimalhumidity levelin the compartment, preserving the
original qualityof thefood, preventing the food fromsticking
togetherandmakingdefrostingathingofthepast.Donotblock
theaerationcellsbyplacingfoodorcontainersindirectcontact
withtherefrigeratingback panel. Close bottles and wrapfood
tightly.

Hotpoint FFU4DG X MTZ Specifications

General

Brand	Hotpoint
Model	FFU4DG X MTZ
Category	Refrigerator
Language	English