Hotpoint FML 942 User Manual

GB
11
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles).
The temperature may be lowered, or even set to a cold wash ( ).
The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value
set for each wash cycle.
! Exception: if the 3 programme is selected, the temperature can be increased up to a value of 90°C.
Setting the spin speed
Turn the SPIN SPEED knob to set the spin speed for the selected wash cycle.
The maximum spin speeds available for each wash cycle are as follows:
Wash cycles Maximum spin speed
Cottons 1400 rpm
Synthetics 1000 rpm
Wool 800 rpm
Silk drain only
The spin speed may be lowered, or the spin cycle can be excluded altogether by selecting the symbol .
The washing machine will automatically prevent you from selecting a spin speed which is higher than the maximum speed
set for each wash cycle.
Functions
The various wash functions available with this washing machine will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note:
- If the selected function is not compatible with the programmed wash cycle, the corresponding indicator light will flash and
a sound alert (3 beeps); the function will not be activated.
- If a function which is incompatible with another function selected previously, only the most recent selection will remain active.
Super Wash
This option offers a high-performance wash due to the greater quantity of water used in the initial phase of the cycle, and due
to the increased wash cycle duration, is particularly useful for the removal of stubborn stains.
Extra Rinse
By selecting this function, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
Easy Iron
By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end
of the cycle the washing machine will perform slow rotations of the drum; the EASY IRON and START/PAUSE indicator lights
will flash (orange) and the phase will remain lit in a fixed manner. To end the cycle, press the START/PAUSE button or
the EASY IRON button.
Timer Saver
If you select this option, the wash cycle duration will be reduced by up to 50%, depending on the selected cycle, thereby gua-
ranteeing simultaneous water and energy saving. Use this cycle for lightly soiled garments.
Personalisation

Hotpoint FML 942 Specifications

General

Brand	Hotpoint
Model	FML 942
Category	Washer
Language	English

Summary

Installation Guide

Unpacking and Levelling the Appliance

Instructions for unpacking the washing machine and adjusting its feet for stable operation.

Connecting the Water Inlet Hose

Details on how to properly connect the appliance's water inlet hose to a cold water tap.

Connecting the Drain Hose

Guidance on correctly installing the drain hose to a suitable waste outlet.

Electric Connection Safety

Essential information for safely connecting the washing machine to the electrical supply.

Performing the First Wash Cycle

Steps to follow for the initial wash cycle before using the appliance with laundry.

Technical Specifications

Key technical data, dimensions, and performance specifications of the washing machine.

Care and Maintenance Procedures

Disconnecting Water and Electricity

Instructions for safely shutting off water and electricity supplies before maintenance.

Cleaning the Washing Machine

Guidance on cleaning the exterior, interior, and specific components of the appliance.

Cleaning the Detergent Dispenser

Steps for removing and cleaning the detergent dispenser drawer and compartments.

Door and Drum Care

Tips for maintaining the door seal and drum to prevent odours and ensure longevity.

Cleaning the Pump Filter

Procedure for accessing and cleaning the pump's pre-chamber to remove trapped items.

Inspecting the Water Inlet Hose

Advice on regularly checking the water inlet hose for cracks and damage.

Safety Precautions and Disposal

General Safety Guidelines

Essential safety instructions for domestic use, children, and electrical precautions.

Appliance Disposal Information

Guidelines for environmentally responsible disposal of old appliances and packaging.

Washing Machine Overview

Control Panel Functions

Explanation of buttons, knobs, and indicator lights on the washing machine's control panel.

Standby Mode Operation

Details on the automatic standby system and how to reactivate the machine.

Indicator Light Meanings

Interpretation of indicator lights for wash cycle phases and door lock status.

Starting a Wash Cycle

A step-by-step guide to selecting programs and initiating a wash cycle.

Wash Cycles Guide

Detailed Wash Cycle Table

Comprehensive table listing all wash cycles with temperatures, speeds, and consumption data.

Personalising Your Wash

Setting Temperature and Spin Speed

How to adjust wash temperature and spin speed to suit laundry requirements.

Understanding Wash Functions

Explanation of special functions like Super Wash, Extra Rinse, Easy Iron, and Timer Saver.

Detergents and Laundry Preparation

Detergent Dispenser Usage

Correct methods for dosing detergent and additives into the dispenser compartments.

Preparing Laundry for Washing

Guidelines for sorting laundry by fabric type, colour, and weight.

Special Care Garment Advice

Specific washing instructions for items like Anti Stain, Wool, and Delicates.

Load Balancing System

Information on the load balancing system and tips for preventing excessive vibration.

Troubleshooting Common Issues

Power and Start-up Problems

Solutions for issues related to the machine not switching on or starting a cycle.

Water Filling and Draining Issues

Troubleshooting problems with water intake, continuous filling, or draining.

Operational Problems (Drain, Spin, Heat, Wash)

Resolving issues with draining, spinning, heating, or poor wash results.

Performance and Vibration Issues

Addressing long program times and excessive vibration during the spin cycle.

Noise, Spin, and Leakage Problems

Solutions for excessive noise, spin problems, and leaks from the dispenser or machine.

Indicator Lights, Smells, and Door Issues

Diagnosing flashing lights, unpleasant odours, and problems opening the door.

Water Level, Foam, and Shut-off Issues

Addressing low water levels, excessive foam, and automatic power-off.

General Troubleshooting Advice

General tips on sensors, cycle completion, and common operational anomalies.

Product Guarantee and Support

Understanding the Manufacturer's Guarantee

Details on the 12-month parts and labour guarantee, including terms and conditions.

Recycling and Disposal Guidelines

Information on responsible recycling and disposal of the appliance and its packaging.

Repairs and After-Sales Service

Contact information for obtaining product help, repairs, and spare parts.