5
Important
Information
Installation Description
Start and
Programmes Laundry
Warnings and
Suggestions
Maintenance
and Care Service
Troubleshooting
GB
Dryer Description
Control panel
TIMER
Knob
START
Button
Indicator
Empty Water
Light
The Empty Water indicator light signals that the water
container is full and must be emptied. The light will
take a few seconds to go out after replacing the
empty water container, the dryer must be running for
this to happen.
Note: If the water container fills the indicator lights,
the heat is turned off and your laundry will not dry.
The TIMER knob sets a drying time.
Rotate it clockwise, never counter-clockwise, until
the indicator is pointing to the drying time you want to
select (see Start and Programmes).
The START button begins drying a selected
programme (see Start and Programmes).
The HEAT button selects drying temperature (see
Start and Programmes).
OUT: LOW heat
IN: HIGH heat
HEAT
Button
The features
Water container
Filter
Condenser cover
Rating plate
Model & Serial numbers
Condenser cover handle
(Pull to open)
Air intake grille
To Next Page
Loading...
Need help?
General