Solid-state drive
Description Spare part number
512 GB, PCIe, NVMe L23225-001
256 GB, PCIe, NVMe L23224-001
256 GB, SATA-3, TLC L23223-001
128 GB, SATA-3, TLC L23222-001
Before removing the solid-state drive, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see Bottom cover on page 29).
5. Remove the battery (see Battery on page 31).
Remove the solid-state drive:
▲
Remove the Phillips M2.0×3.0 screw (1), and then pull the solid-state drive module from the socket (2).
Reverse this procedure to install the solid-state drive.
Component replacement procedures 37
To Next Page
Loading...
Need help?
General