HP 14 Series User Manual

Fingerprint reader board
Table 5-8 Fingerprint reader board description and part number
Description Spare part number
Fingerprint reader board
NOTE: The ngerprint reader board spare part kit does not include the cable. The cable is available as
spare part number L64902-001.
L64901-001
Before removing the ngerprint reader board, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 26).
2. Remove the bottom cover (see Bottom cover on page 27).
3. Remove the battery (see Battery on page 29).
Remove the ngerprint reader board:
1. Disconnect the cable from the ZIF connector on the ngerprint reader board (1).
2. Remove the Phillips M2.0 × 2.0 screw (2) that secures the ngerprint reader bracket to the computer.
3. Remove the bracket (3), and then remove the ngerprint reader board from the computer (4).
Reverse this procedure to install the ngerprint reader board.
38 Chapter 5 Removal and replacement procedures for authorized service provider parts

HP 14 Series Specifications

General

Brand	HP
Model	14 Series
Category	Laptop
Language	English