10
1. Make sure the correct power source is used.
2. Connect one end of the AC power cord to the AC-input power receptacle on the switch.
3. Connect the other end of the AC power cord to the AC power outlet.
4. Check the Power LED.
If it is ON, it means the power connection is correct.
Verifying the installation
After you complete the installation, verify that:
• There is enough space for heat dissipation around the switch, and the rack or workbench is stable.
• The grounding cable is securely connected.
• The correct power source is used.
• All the interface cables are cabled indoors.
To Next Page
Loading...
Need help?
General
