HP 1410-8G Switch
(J9559A)
I/O ports and slots
8 RJ-45 autosensing 10/100/1000 ports; Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or
full; 1000BASE-T: full only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type
1000BASE-T)
Supports a maximum of 8 autosensing 10/100/1000 ports
Physical characteristics
Dimensions
6.14(w) x 3.8(d) x 0.96(h) in (15.6 x 9.65 x 2.45 cm)
Weight
0.74 lb (0.34 kg)
Memory and processor
4 Kb EEPROM capacity; packet buffer size: 192 KB
Mounting
Wall, desktop, and under-table mounting
Performance
100 Mb Latency
< 3.6 µs (LIFO 64-byte packets)
1000 Mb Latency
< 1.2 µs (LIFO 64-byte packets)
Throughput
11.9 Mpps (64-byte packets)
Switching capacity
16 Gbps
MAC address table size
4096 entries
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 90% @ 149°F (65°C), noncondensing
Altitude
up to 10,000 ft. (3 km)
Acoustic
Power: 0 dB No fan
Electrical characteristics
Frequency
50/60 Hz
Maximum heat
dissipation
41 BTU/hr (43.26 kJ/hr)
Voltage
100 - 240 VAC
Current
1.0 A
Maximum power rating
12 W
Notes
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
The exact input voltage and frequency rating are determined by the specific
power adaptor part number ordered. Please select the correct power adaptor
country option.
Safety
CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950-1
Emissions
FCC Rules Part 15, Subpart B Class A
Immunity
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
QuickSpecs
HP 1410 Switch series
Technical Specifications
DA - 13674 Worldwide — Version 12 — December 16, 2013
Page 6
To Next Page
Loading...
Need help?
General
