HP 2600 Series User Manual

2-9
Configuring Username and Password Security
Front-Panel Security
Reset Button
Pressing the Reset button alone for one second causes the switch to reboot.
Figure 2-6. Press and hold the Reset Button for One Second To Reboot the Switch
Restoring the Factory Default Configuration
You can also use the Reset button together with the Clear button (Reset+Clear)
to restore the factory default configuration for the switch. To do this:
1. Press and hold the Reset button.
2. While holding the Reset button, press and hold the Clear button.
Reset Clear
Reset Clear
Reset Clear

HP 2600 Series Specifications

General

Brand	HP
Model	2600 Series
Category	Switch
Language	English