HP 2610 User Manual

35
Enhancements
Release R.11.14 Enhancements
DHCP Option 66 Automatic Configuration Update
Overview
ProCurve switches are initially booted up with the factory-shipped configuration file. This enhance-
ment provides a way to automatically download a different configuration file from a TFTP server
using DHCP Option 66. The prerequisites for this to function correctly are:
■ One or more DHCP servers with Option 66 are enabled
■ One or more TFTP servers has the desired configuration file.
Caution
This feature must use configuration files generated on the switch to function correctly. If you use
configuration files that were not generated on the switch, and then enable this feature, the switch
may reboot continuously.
CLI Command
The command to enable the configuration update using Option 66 is:
Figure 1. Example of Enabling Configuration File Update Using Option 66
Syntax: [no] dhcp config-file-update
Enables configuration file update using Option 66.
Default: Enabled
ProCurve(config)# dhcp config-file-update

HP 2610 Specifications

General

Brand	HP
Model	2610
Category	Switch
Language	English