SNMP agents. The agents are included on the ProLiant 100-series model-specific “Easy Set-up” CDs.
They are also available at www.hp.com/servers/easysetup
.
The SNMP agents enable the following capabilities on 100-series G6 servers:
• Health monitoring capabilities, including monitoring for drives, fans, network, power supplies, and
temperature
• Alerting capabilities, including basic alert notification for Smart Array drive pre-failure only
• Performance monitoring capabilities providing information on processor, memory, disk free space,
network utilization, and I/O
Remote management and control
All ProLiant 100-series G6 servers include ProLiant Onboard Administrator Powered by LO100i.
ProLiant Onboard Administrator represents the core embedded management functions in ProLiant DL
and ML 100-series G6 servers. LO100i works in concert with HP SIM, BSU, and Option ROM
Configuration for Arrays (ORCA) to provide remote management, deployment, and control functions
without additional software. This functionality is available locally though the BSU, or remotely with a
web browser through HP SIM. Additional software functionality can be added with the HP Lights-Out
100i Advanced Licenses which include Virtual KVM (remote graphical console) and virtual media
capabilities.
HP Lights-Out 100i
HP LO10
0i Remote Management is hardware and firmware that provides remote server access and
control capabilities through an Ethernet interface. The HP LO100i management interface is active
even when the OS is not operating. The LO100i management processor obtains its power from the
auxiliary power plane of the server, so it is available as long as the server is plugged into an active
power source. HP LO100i Remote Management is compatible with industry standards including IPMI
2.0 for hardware health, DCMI 1.0, as well as Secure Sockets Layer (SSL) and Secure Shell (SSH)
technology for secure communications over public and private local area networks. HP LO100i is fully
accessible using popular web browsers. HP LO100i is also accessible using System Management
Architecture for Server Hardware Command line Protocol (SMASH CLP) for Telnet and SSH sessions.
NOTE:
ProLiant 100-series G6 servers do not support LO100i Select and LO100c.
LO100i Advanced Pack capabilities are available through an optional license key. Table 4 shows the
differences in functionality between LO100i Standard, which comes with all 100-series G6 servers,
and LO100i Advanced Pack.
20
To Next Page
Need help?
General