HP 15” Color Monitor User’s Guide
Using Your Monitor
6 EnglishEnglish
Using Your Monitor
Press FUNC. to select the type of adjustment you require.
Use the Adjustment buttons or to make the required
adjustments. The LEDs indicate the adjustment control you have
selected.
Press and simultaneously to return to the factory preset
setting.
NOTE Your monitor is automatically demagnetized each time it is switched
On. This ensures color purity. To maintain color purity, we
recommend that each week you switch the monitor off for at least 30
minutes before switching it on again.
Use the table below to determine which menu item you require:
On/Off button
Status Indicator
Adjustment buttons
LEDs
Menu Item Use to Adjust...
Contrast the contrast (image white level).
Brightness the brightness (image black level).
H-Size the horizontal size of the displayed image.
H-Center the horizontal position of the displayed image.
V-Size the vertical size of the displayed image.
V-Center the vertical position of the displayed image.
Pincushion the vertical edges if they appear to curl inwards or
outwards.
Trapezoid the vertical edges if they do not appear to be parallel.
Tilt and rotate the left and right edges of the image.
To Next Page
Loading...
Need help?
General
