50 Care and maintenance
Clean the document scanner area
4. Clean the document feeder rubber piece at the back of the control panel.
5. Carefully wipe the scanning glass with a soft, dry, lint free cloth.
• If the glass is very dirty, first wipe it with a slightly dampened cloth, then with a dry
one.
• Be careful not to scratch the glass surface.
6. Replace the roller in reverse order, and then close the control panel firmly until it clicks
into place.
CB782-90001_UG_EN.book Page 50 Friday, June 29, 2007 4:13 PM
To Next Page
Loading...
Need help?
General
