Managing images on the camera 17
Note A Macintosh computer does not recognize a DPOF
print order.
To create or edit a print order
1 Press the button to turn on the image display.
2 Press the button to open the main menu, use the up or
down side of the controller to select the Print (DPOF)
menu, and then press
OK.
3 If you are marking or unmarking a single image, use the
controller to scroll to the image you want to add to or remove
from the print order.
Note If you are marking or unmarking all images on the
CF memory card, it does not matter which image is
displayed on the image display.
4 Select Yes to mark a single image. If you want to mark or
unmark another image, use the right or left side of the
controller to scroll to the image, select Yes, and then press
OK.
Repeat this step until you have finished marking and
unmarking images. When you are finished, press
OK to exit.
-Or-
Select Mark All or Clear All if you are marking or unmarking all
the images on the CF memory card, and then press
OK. You
are then asked to confirm. To confirm, use the up or down side
of the controller to select Yes, and then press
OK.
Note A DPOF file can contain up to 100 images. If you
choose to mark all images and more than 100
images are stored on the CF memory card, only the
first 100 images will be stored in the DPOF file.
HUG.book Page 17 Tuesday, September 25, 2001 1:03 PM
To Next Page
Loading...
Need help?
General
