PS2 Virtual Media Interface Adapter support servers with PS2 mouse and keyboard connection and a USB port for virtual
media (recommended for ProLiant servers).
USB Virtual Media Interface Adapter supports servers without PS2 mouse and keyboard connections such as Integrity
servers running Microsoft Windows.
USB 2.0 protocol and speed supported on both Virtual Media Interface Adapters.
Virtual Media Interface Adapters provide Common Access Card (CAC). Virtual Media speed with the CAC Interface Adapters
is USB 1.1 Full Speed.
Support for a variety of server connections with Interface Adapters where virtual media is not needed.
PS/2
USB mouse and keyboard
VT100 serial console support
BladeSystems p-Class support via front diagnostics connector
The following input devices provide a convenient front USB pass through port for connecting USB media to the Server
Console Switch with Virtual Media
HP 1U Rackmount Keyboard with USB
HP TFT7600 Rackmount Keyboard Monitor
NOTE:
For more information please visit:
http://www.hp.com/go/kvm
.
Cascaded Configurations
Cascading, also called tiering, is the ability to connect one or more switches under a single switch at the top as in a pyramid. Cascading
allows an administrator to access larger numbers of servers from a single local or remote console. The HP IP Console Switch G2 with
Virtual Media & CAC will support up to 2 levels of tiering under certain conditions
HP IP Console Switches can be supported at the top or at the second tier of a cascaded configuration.
HP IP Console Switches with Virtual Media may be cascaded to HP Server Console Switches with Virtual Media or any Cat5 based
HP Server Console Switches by connecting a Cat5 cable from a server port on the top switch to the dedicated tiering port on the
switch below. Interface adapters are not needed to cascade HP Server Console Switches.
Virtual media can be mapped to servers on any tier but only if the server is connected to a HP Server Console Switch with Virtual
Media using a Virtual Media Interface Adapter. Virtual media operation requires a Virtual Media Interface Adapter connected to a
HP Console Switch with Virtual Media.
To perform a firmware upgrade for a cascaded HP Server Console Switch and all attached Interface Adapters; you must connect
to the cascaded HP KVM Server Console Switch OBWI.
NOTE:
For more information on cascading HP Server Console Switches please visit:
http://www.hp.com/go/kvm
.
PS2/USB Virtual Media, CAC Interface Adapter (PN: AF624A)
QuickSpecs
HP KVM Server Console Switch G2 with Virtual Media &
CAC
Standard Features
DA - 13475 Worldwide — Version 7 — November 20, 2013
Page 4
To Next Page
Loading...
Need help?
General
