HP All-in-One Product End-Of-Life Disassembly Instructions

Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1
2# X10
Description #2
1# X10
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Please refer to the 3.2.3 disassemble rear cover
2. Please refer to the 3.2.4 disassemble the stand
3. Please refer to the 3.2.5 disassemble Speaker
4. Please refer to the 3.2.6 disassemble HDD & ODD
5. Please refer to the 3.2.7 disassemble MB Shielding
6. Please refer to the 3.2.8 disassemble FAN Module
7. Please refer to the 3.2.9 disassemble converter board
8. Please refer to the 3.2.10 disassemble Webcam
9. Please refer to the 3.2.11 disassemble Wireless card
10. Please refer to the 3.2.12 disassemble the cables connected from MB
11. Please refer to the 3.2.13 disassemble MB and MB battery
12. Please refer to the 3.2.14 disassemble DDR
13. Please refer to the 3.2.15 separate Base pan and front bezel and panel
14. Please refer to the 3.2.16 remove Mouse/Keyboard Battery/MB
15. Please refer to the 3.2.17 remove power supply
16.
17.
18.
19.
20.
21.
22.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01

HP All-in-One Specifications

General

Brand	HP
Model	All-in-One
Category	Desktop
Language	English