Monitor Brightness and Contrast
Often, the brightness control on a monitor is boosted to compensate for images that look dim due to a
lack of gamma correction. Before applying gamma correction, the monitor brightness should be adjusted
so a blank screen looks black in typical viewing conditions. Next, display a picture that is predominantly
black, and adjust the brightness so that the monitor reproduces true black on the screen. The brightness
should be adjusted to the threshold where it is not so far down as to "swallow" codes greater than the
black code, but not so high that the picture sits on a "pedestal" of dark grey. When the critical point is
reached, leave the brightness control in that position. Then set contrast to suit your preference for
display intensity. How to run the Gamma Correction Tool
___________________________________________________________________________
Note: You do not need to have superuser privileges to use the gamma correction tool.
___________________________________________________________________________
To use the gamma correction tool, execute the following command:
/opt/graphics/common/bin/gamma
If you get the error "Can't open display", set the DISPLAY environment variable by executing this
command:
export DISPLAY=:0.0
How to Install the Gamma Icon Into your CDE Front Panel
In a terminal window, go to your home directory and follow these steps:
1. Execute this command:
cp /opt/graphics/common/icons/Gamma.* $HOME/.dt/icons/
2. Select the
Applications Icon on the CDE Front Panel.
3. Double click the
"Desktop_Apps" button.
4. Double click the
"Create Action" button.
Graphics Administration Guide for HP-UX 10.20
To Next Page
Loading...
Need help?
General